The tap water is no longer considered safe. People are becoming well versed in the seriousness of the health complications that are caused due to contaminated water. Thereby, they are bound to take preventive measures so as to keep their family safe. The most effective way is to install a reverse osmosis filtration system. It is claimed that the reverse osmosis filtration system removes 99% of contamination that is dissolved in water by using pressure to force the water to pass through the membrane where the contaminants are trapped, allowing only pure water to pass on after filtration. Since there are many RO filtration systems available in the market, it becomes challenging for people to choose the best RO Filtration system. The Water Softeners from Fleck are always considered to be the top rated and highly appreciated, but there are also other models that worth considering. For your assistance, below is the short guide on things that you need to consider to make a wise purchasing decision.
The Water Sources
To buy the best reverse osmosis filtration system, you need to know the water source. There are two different types of water sources, the city water and well water sources. In urban areas, the water source comes from the water treatment plant and this water is treated prior to supply and hence it is less contaminated. So, the basic models of reverse osmosis filtration would be the best choice in such case. However, in suburban areas where the private wells are the water sources, the level of contamination would be higher, and hence you would require an RO filtration system with UV light sterilizer which can remove the microorganism from the source water.
Owing to the technology difference the rejection ratio of RO filtration system differs. Besides the reverse osmosis membrane filter, there are also post filters and pre-filters which would determine the efficiency of the filtration system. The best way to evaluate the effectiveness of the filtration system is by using the total dissolved solid meter which helps you to gauge the filtered water against the source water. Another way is to check the certification in NSF and WQA which proves its efficiency in filtering contaminated water.
The flow rate depends on a variety of factors like water temperature and water pressure. Most of the RO systems are about to filter 50 gallons per day in an optimum condition. This is the amount which is 20% lesser than stated. So, if you have a more extensive family of 8 members, then ensure to go for RO systems that can produce 50GDP like Water Softeners From Fleck.
Sufficient pressure is required for pushing the source water through fine membrane for filtration of the contaminated water. The filters with higher water pressure are always best to meet the filtration needs of the RO system. If the source water pressure is lower than 40PSI, then ensure buying a filter with s booster pump.
Finally, the budget of the RO system is what you need to decide. Check the initial cost, and the cost required for its maintenance and based on its value make the purchasing decision.